Indian Council of Agricultural Research
(Agricultural Knowledge Management Information System)


ICAR-Central Institute of Post-harvest Engineering & Technology, Post Office PAU, Behind Radha Swami Satsang Bhawan, Humbran Road, Ludhiana-141004 Punjab (www.ciphet.in)
Click Here to See Management Committee
Instrument Details
Instrument/Facility Name: Rheometer
Make                                   : Anton Paar, 2010
Model                                  : Model: MCR 101 Anton Paar
Specification   :Normal force range: 0.01-50 N Maximum torque: 200 mNm Max. speed 1/min 3000

Click to ViewNormal force range: 0.01-50 N Maximum torque: 200 mNm Max. speed 1/min 3000

  Working Principles
Click to ViewA Rheometer is a laboratory device used to measure the way in which a liquid, suspension or slurry flows in response to applied forces. It is used for those fluids which cannot be defined by a single value of viscosity and therefore require more parameters to be set and measured than is the case for a viscometer. More specifically, rheometers measure the forces (like shear) associated with a flowing substance. Typically, the flowing substance is much thicker than a liquid (like concrete). It also measures the effects of flow at different pressures-especially key characteristics of the flow like shear (how difficult it is to change the flow) or how the flow of a substance tends to drag surrounding materials.

  Applications
  User Instructions
1. Determines Fluid flow behaviour 2. Viscoelastic properties of food products. 3. Temperature dependent flow properties Do not bend or drop the measuring system. Even a slight mechanical damage may cause serious measurement errors. For air bearing instruments, make sure that the air supply and air drier are connected and working at the correct pressure

  Contact Us
Contact No. 0161-2313136
Email Id avimithi@gmail.com

  Rheometer Charges
Procedure Name
Industry
University
National LAB/R&D
Remark
Dr. Manju Bala, Principal Scientist
767
667
720
Per Sample

Additional Rs 100/-towards postal charges if result are to be posted
The Demand Draft should be in favour of ""
Letter, DD & Samples send to ""